The main printing process of warning signs: light color printing first, silk screen and positioning: aluminum plate information is positioned with three points. When register printing. Reprint dark. The interval between the printing plate and the substrate is 12 mm, and the interval is very large. It is related to the selection of the screen. The nylon screen has good elasticity and great flexibility, usually 23 mm. The polyurethane rubber sheet for the scraper has a hardness of 7075 degrees and a thickness of 89 mm. The viewpoint of the scraper during printing is 70 degrees. The speed of the scraper should move in a straight line at a uniform speed. Appropriate protective film: In order to avoid the formation of wounds during cutting and transportation, the surface of the printed label should be covered with a transparent pressure-sensitive adhesive protective film. Cutting: With a small shear bed, the forming can be punched with holes or edges.

The anti-collision reflective warning sticker for reflective poles is made of glass beads with high refractive index, which is made by advanced technology after focusing. It can reflect the direct light from a distance back to the luminous place, and has good retro-reflective optical performance no matter day or night. Especially at night, it can display as high visibility as during the day. The use of this high visibility reflective material reflective road pole anti-collision reflective warning sticker can be easily found by drivers at night if it is in a distant place or under the interference of light or scattered light.